Table of Contents
Advertisement
Examples of Configuration
Wireless Channel / SSID 11 / AWAP08O-11gHP
MAC Address of WLAN(BSSID) 000000042728
DHCP Server enabled (IP pool 192.168.2.1~253)
192.168.2.x
192.168.2.x
AP - Bridge
DEV 3
LAN 192.168.2.203/24
Channel / SSID 5 /
192.168.2.x
This example demonstrates how to set up a network with different device
configurations. There are 2 DHCP servers (DEV1/DEV4) in the network to control
the IP configuration of 2 domains (192.168.2.x/192.168.3.x). Once the setting is
done, all the PCs can visit Internet through DEV1.
We assume all the devices keep the factory default setting. To make sure that user
can continuing press the rest button for more than 5 seconds to restore the factory
default setting.
The following descriptions show the steps to configure DEV1 to DEV5.
DEV 1
LAN 192.168.2.254/24
WAN PPPoE connection
WDS+AP - Bridge
DEV 2
LAN 192.168.2.202/24
Wireless Channel / SSID 11 / AWAP08O-11gHP
MAC Address of WLAN (BSSID) 000000042692
192.168.2.x
DEV 5
LAN 192.168.2.205/24
192.168.2.x
11
WDS+AP - Router
Internet
ADSL
Infrastructure Client - Bridge
DEV 4
LAN 192.168.3.1/24
WAN Dynamic IP address
DHCP Server enabled (IP pool 192.168.3.2~254)
Infrastructure Client – Router (WISP)
192.168.3.x
192.168.3.x
Advertisement
Table of Contents
