Getting Started; Hardware Installation; Installation In Microsoft; Installation In Mac Os X - PRESONUS FIRESTUDIO MOBILE Owner's Manual

2

GETTING STARTED

2.1

Hardware Installation

GETTING STARTED
2.1 Hardware Installation
The Universal Control and included driver can
be used for any interface in the FireStudio family
(FireStudio [26x26], FireStudio Lightpipe, FireStudio
Tube, FireStudio Project, FireStudio Mobile, and
StudioLive 16.4.2). For more information on the
Universal Control application and multiple interface
integration, please review Sections 3.1 and 4.1.
2.1.1 Installation in Microsoft Windows
After you install the Universal Control CD in your CD
or DVD drive, the Universal Control installer will take
you through each step of the installation process.
Please read each message carefully, ensuring
especially that you do not connect your FireStudio
Mobile until the installer has fi nished and you have
rebooted your computer.
The FireStudio Mobile Installer was designed to be
as simple and easy-to-follow as possible. Please read
each message carefully to ensure that the FireStudio
Mobile driver is properly installed.
Before continuing the FireStudio Mobile Installation
Setup, please close all applications and disconnect
your FireStudio Mobile from your computer. If you
see any Windows Security alerts, click "Install this
driver software anyway" (Vista) or "Continue anyway"
(XP).
At the end of the installation, you will be prompted
to reboot your computer to complete the
installation. Click "Finish" to automatically restart
your PC. Once your computer has rebooted, connect
the FireStudio Mobile. When the Found New
10
PreSonus FireStudio Mobile Owner's Manual
Hardware wizard launches, follow the recommended
steps. When the sync light remains solid blue, your
FireStudio Mobile is synced to your computer and is
ready to use!
2.1.2

Installation in Mac OS X

After inserting the installation CD into your disc
drive, browse the disc and run the FireStudio Mobile
installer, which will take you through each step of
the installation process. Please read each message
carefully, ensuring especially that you do not
connect your FireStudio Mobile until the installer has
fi nished and you have rebooted your computer.
To begin installing the FireStudio Mobile driver on
your Mac, double click on the FireStudio Mobile logo.
The FireStudio Mobile installer requires that your
user password be entered as a security measure.
Once you have entered your password, click "OK" to
proceed with the rest of the installation.
When the Installer has fi nished, connect your
FireStudio Mobile to your computer with a FireWire
cable. Once the sync light is solid blue, your
FireStudio Mobile is ready to use.
GETTING STARTED 2
Hardware Installation 2.1
11