Table of Contents
Advertisement
CONTROLS AND CONNECTIONS
Settings: Meter Decay
Settings: Always On Top
3.1.3 WDM Settings (PC only)
Like the rest of the FireStudio family of interfaces, the FireStudio features advanced WDM features that
enhance its use as an audio interface. In the Settings menu of the Launch window, you will find the WDM
Setup option. From here you can configure your WDM input and output streams.
Sets the Response Time for the Meters in the Device Window
The Universal Control gives you the option to set the response time for the meters
in the Device Window. By default, this is set to Normal. Enable Slow Meter
Decay for more accurately meter the peaks and falls of the signal. Enable Fast
Metering to monitor your signal in realtime.
Allows the Launch Window to Stay in View When Other Applications Are in Use
When this is enabled, the Launch window will remain in the foreground when
other applications are active, rather than being in the background behind the
current application's window.
1)
In the Lancher window, go to Settings|WDM Setup.
2)
The WDM Channel Mapper window will open. By default, WDM
Outputs 1 and 2 are routed to FireStudio DAW Streams 1 and 2. To
change the default routing, simply select WDM Output 1 and 2 and
drag them to your preferred output pair.
25 | PreSonus 2008
Advertisement
Table of Contents
