Back Panel Layout - PRESONUS CENTRAL STATION User Manual

2 . 6 B A C K P A N E L L A Y O U T
The back panel of the CENTRAL STATION is divided into six sections: DIGITAL INPUTS, SPEAKER
OUTPUTS, LINE OUTPUTS, ANALONG INPUTS, CONSOLE REMOTE CONTROL and TALKBACK.
DIGITAL INPUTS - 24 bit/192k digital inputs. Automatically reads and locks to sample rate of incoming digital
stream. Can receive and lock to sample rates of 44.1, 48, 96, and 192k.
•
TOSLINK – optical stereo digital format. NOT THE SAME AS ADAT FORMAT.
•
SPDIF INPUT - Stereo digital input format via digital RCA TS connector.
SPEAKER OUTPUTS L/R (A, B, C) – Left (L) and Right (R) stereo balanced line level 1/4" TRS outputs to
connect to powered monitors or speaker power amps.
LINE OUTPUTS
•
MAIN (L/R) – Left and Right stereo balanced line level 1/4" TRS outputs to connect to recording device.
There is no attenuator (volume control) on this output.
•
CUE (L/R) - Left and Right stereo balanced line level 1/4" TRS outputs to connect to headphone
distribution amplifier. Front panel CUE OUTPUT LEVEL adjustment controls volume level.
ANALOG INPUTS
•
TRS 1 (L/R) – Left and Right stereo balanced line level 1/4" TRS inputs.
•
TRS 2 (L/R) – Left and Right stereo balanced line level 1/4" TRS inputs.
•
AUX (L/R) – Left and Right stereo unbalanced line level RCA TS inputs.
CONSOLE REMOTE CONTROL
•
ACTIVATE – Activates CSR-1 optional remote control. When ACTIVATE is pressed, MAIN LEVEL
control on CENTRAL STATION IS BYPASSED. (All other controls function.)
•
CONSOLE – DB15 15-pin connector for connection to optional CSR-1 CENTRAL STATION remote
control.
TALKBACK
•
PEDAL – Unbalanced 1/4" TS cable for connecting momentary normal open type footswitch.
•
ACTIVATE – Activates external dynamic microphone to be the TALKBACK . Onboard CENTRAL
STATION MIC is bypassed when ACTIVATE is pressed.
CONTROLS & CONNECTIONS
9