Table of Contents
Advertisement
Control Pad Features
READ THE iNSTRUCTiONS
CAREFULLY
BEFORE USING THE OVEN.
For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function
follow later in this Use & Care Guide.
I
Note: The
function will not work if the time of
clock is not set.
oven
day
Oven Interior Light Pad-
Cook Time Pad- Used
Used to turn oven interior
to enter the length of
light ON and OFF.
the baking time.
Feature indicator
lights- These light
show which feature is
in use.
X
Select Clean Pad-
Used to select the
self-cleaning
cycle.
Clock Pad-
Used to set the
time of day.
Kitchen Timer
Pad- Used to set
or cancel the
minute timer. The
minute timer
not start or stop
cooking.
Delay Start Pad- Used
to set the desired start
time for baking. Can be
used with OVEN COOK
TiME to program a
delayed bake cycle.
I
Up and Down arrow pads- Used
Add 1 Minute Pad- Used to add 1
along with the function pads to
minute to the Timer Countdown=This
select oven temperature, cooking
feature works with the Kitchen Timer
time, start time (when programming only and does not affect any cook time
an automatic start time), time of day, or start time functions=
clean time and minute timer.
J
Bake Pad- Used to
....
\
_
enter the normal baking
/\
_
'" _
mode temperature.
/\. _
,,,_-,,,,_j_
Broil Pad- Used to
_(: _#UT1E) (BAKE) (BRoiL_-seleet
the variable broil
_\
_
_
_
function.
_\_
_
_
__Warm&HoldPad-
O OVEN
_}
_,_b-oK ) _,,_L_)
Used to set the Keep
o
PREHEAT
/
_
_
Warm feature.
DOOR LOCKED
_
_
j
'-._'
_
Used to set the Slow
_
OrE
Lg_K_o_ _
Cook feature.
.........
Recipe Reca.-- ! ::i,i
Oven, Preheat, Door Locked & Cooktop
Locked
lights- The "oven" light indicates that the oven is
functioning. The "Preheat" light will glow when the
oven is first set to operate, or if the desired
temperature
is reset higher than the actual oven
temperature.
The "Door Locked" light will flash until
the door locks when the self-clean cycle is in use. It
glows constantly after the door locks.
Used to set the
Stop Pad- Used to clear
Recipe Recall
any function previously
feature.
entered except the time of
day and minute timer.
Push Clear pad to stop
cooking. Also used to
activate the Oven Lock
feature.
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold
for 7 seconds. "- -" or "SP" (speaker) appears in
the display. Within 5 seconds, press ,,% or v
to switch between normal sound operation and silent operation mode. The display
will show either "--" or"SP". Wait 5 seconds to return to normal operating mode. Note: If "SP" appears, the control will operate
with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode.
Temperature
Conversion
(Fahrenheit
/ Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature
to °C (Celsius) or from °C to °F (control should
not be in a Bake or Clean mode):
Press and hold _
for 7 seconds until °F or °C appears in the
1.
display.
2.
Press A
or V
to change °F to °C or °C to °F.
3.
Wait 5 seconds or press _
to accept the changes.
To Operate
the Oven Light
The interior oven light will automatically turn ON when the oven door is opened. Press _
to turn the interior light ON
and OFF whenever the door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is
covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change
the interior oven light, see changing the Oven Light in the General Care & Cleaning section in this Use and Care Guide.
13
Hide quick links:
Advertisement
Table of Contents
