Epson BrightLink 475Wi Installation Manual page 3

10 in. (254 mm) —height
of wall plate plus cover
Required distance from top
of image area to wall plate (c)
Height of
Ceiling
image area (h)
height
(8) After confirming your image size, use tape or a pencil to mark the distance (c)
from the top of the image area on the board to the bottom of the wall plate.
(9) Align the line (horizontal) on the template sheet with the (c) mark, then align
the center line on the template sheet with the center of the image area. Follow
the instructions in the Installation Guide to install the projector.
© 2012 Epson America, Inc. 3/12
Diagonal image
size (S)
Width of image area (w)
Distance from ceiling to
top of image area (d)
Distance from floor to
bottom of image area (f)
CPD-37080