Connecting Through A Network - Epson BrightLink 475Wi Connection Manual

The built-in toolbar will be available on equipment connected to the other (non-selected)
sources, providing PC-free annotation (single-pen support). Use the remote control to
switch sources.

Connecting Through a Network

If both the projector and computer are connected to the same network by Ethernet
cable, users can project through the network. You must install the EasyMP Network
Projection software on the computer (Windows
the
EPSON Projector Software
epson.com/brightlinkdownloads
For full computer interactivity (using Easy Interactive Tools software), you also need to
connect a USB cable from the computer to the projector and select
described on page 2.
If your network includes a wireless router, users can connect to the projector wirelessly from
computers (using EasyMP Network Projection software). Users can also connect wirelessly
® ®
from an iPad , iPhone , or iPod
When the projector is connected to these devices, only the built-in toolbar is available (single
pen support).
If the projector is not connected to a network (or the network does not include a wireless
router), you can purchase the optional wireless LAN module for the projector. This will allow
wireless projection directly from a computer to the projector and use of the built-in interactive
toolbar.
You can purchase the optional wireless LAN module (part number V12H418P12)
®
from an EPSON authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
®
or Mac
CD that came with the projector or at
.
®
touch using the optional EPSON iProjection
Wireless network connection with
interactivity using the built-in toolbar
®
). This software is available on
as the source, as
LAN
™
Wireless router
or access point
®
app.
3