Crestron Roomview Support; Setting Up Crestron Roomview Support - Epson BrightLink 475Wi User Manual

7 Searches for sources
8 Selects the network source
9 Selects the USB Display or USB device source
10 Volume button controls
11 Closed Caption control
6. Select the icon corresponding to the projector function you want to control.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Crestron RoomView Support

If you are using the Crestron RoomView network monitoring and control system, you can set up your
projector for use on the system. Crestron RoomView lets you control and monitor your projector using a
web browser.
Note: You cannot use the EPSON Web Control feature or the Message Broadcasting plug-in for
EasyMP Monitor when you use Crestron RoomView.
For additional information on Crestron RoomView, contact Crestron.

Setting Up Crestron RoomView Support

Controlling a Networked Projector Using Crestron RoomView
Parent topic:
Setting Up Crestron RoomView Support
To set up your projector for monitoring and control using a Crestron RoomView system, make sure your
computer and projector are connected to the network. If you are connecting wirelessly, set up the
projector using the Advanced network connection mode.
Note: If you want to use the Crestron RoomView system when the projector is turned off, you need to
adjust the Standby Setup settings in the Extended menu.
1. Press the Menu button.
2. Select the Network menu and press Enter.
Using the Projector on a Network
Using the Projector on a Network
69