Epson BrightLink 450Wi - Interactive Projector Installation page 4

for Projecting on a Pre-installed Wall-mounted Board
Use this worksheet to determine where to position the wall mount for a BrightLink
with a pre-existing whiteboard.
(1) Measure the ceiling height (distance from the floor to the ceiling).
(2) Measure the height of the board's image area (h).
(3) Measure the width of the board's image area (w).
(4) Measure the distance from the floor to the bottom of the board's image area (f ).
(5) Measure the distance from the ceiling to the top of the board's image area (c).
(6) Measure the thickness of the board (x).
10 in. (254 mm)—height of
wall plate plus cover
Required distance from top
of image area to wall plate (b)
Height of
image area (h)
Installation Worksheet
Width of image area (w)
Distance from floor to
bottom of image area (f)
Distance from ceiling to
top of image area (c)
Diagonal size of
image area (S)
™ installation
_____
_____ (h)
_____ (w)
_____ (f )
_____ (c)
_____ (x)