Dell S300W User Manual page 44

L —Allows you to set the language for the OSD. Press
ANGUAGE
Language menu.
P M —Allows you to select the projector mode, depending upon how
ROJECTOR ODE
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Wall Mount — The projector turns the image upside down
for wall-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
• Rear Projection-Wall Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a wall-
mounted projection.
V. K —Manually adjust the vertical image distortion caused by tilting the
EYSTONE
projector.
A V —Allows you to set buzzer alert loudness (Off, Low, Mid or High) for
LERT OLUME
power on/off.
S VGA O
TANDBY UTPUT
standby status. Default is Off.
3D DISPLAY—Select on to start the 3D display function. Default is off.
44 Using Your Projector
—Select On or Off the VGA output function at projector
to activate the