Directed Electronics Viper 771XV Owner's Manual page 47

Directed electronics combination remote start alarm system owner's manual 771xv

Hide thumbs Also See for Viper 771XV:

Table of Contents

ready circuitry for the starter interrupt, however installation may

require additional labor.

A physical connection to the system. An input can be

Input:

provided by a sensor, pinswitch or by existing systems in the

vehicle, such as ignition or courtesy lights.

A light mounted at a discretionary location

In-vehicle status LED:

inside the vehicle. It is used to indicate the status of your system.

This system has a dual zone shock sensor. This

Shock Sensor:

sensor is mounted in the vehicle and designed to pick up impacts

to the vehicle or glass.

A hand-held, remote control which operates the

2-Way Remote:

various functions of your system.

This is what happens when the

Trigger or Triggered Sequence:

alarm "goes off " or "trips." The triggered sequence of your

system consists of the siren sounding and parking lights flashing

for the programmed duration.

A small push button switch mounted at a discre-

Valet Button:

tionary location inside the vehicle. It is used to override the

starter interrupt when a 2-way remote is lost or damaged, or to

enter or exit Valet Mode.

Lighter impacts to the vehicle will

Warning Zone Response:

generate the Warning Zone response. It consists of several

seconds of siren chirps and parking light flashes.

Table of Contents