Getting Familiar With The Gvx; Operating Elements - JOBO GIGA VU EXTREME User Manual

First charge
Please read this instruction carefully before the
first use of GVX!
The GVX will be delivered with a completely
discharged battery.
Please charge the battery for 9 hours before
first use of GVX.
Then use the battery until it is completely
discharged. Only then will the battery report
correct levels to the software. The correct
battery level in percent will only be displayed
reliably after the battery has gone through
three full charge and discharge cycles. This
is a limitation that exists with all lithium ion
batteries.
2.4 Getting Familiar with the
GVX
Fig. 2.3: Function elements
1 Infra-red receiver
2 Analogue audio/video out
6
3 Slot for CompactFlash memory card
4 On/off switch
5 Microphone
6 USB2 high speed interface for data transfer
to a computer
7 USB2 OTG interface for data transfer to a
printer, camera or external hard disk
8 "Home" button (always returns to the main
menu)
9 "Back" button (always takes you one step
back)
10 "Settings" button with LED
11 Digital video out
12 5 softkeys with different functions
depending on the actual menu
13 Power supply socket
14 Loudspeaker
15 Combined "Enter" button and 4-way
joystick to navigate in the screen menus

2.4.1 Operating Elements

Joystick
The 4-way joystick is used for navigating and
selecting.
Navigating:
The joystick can be used to scroll trough a
list of possible options. For this purpose the
joystick has to be moved up or down, resp.
to the left or right. The possible options will
highlight as you scroll.
Selecting:
Pressing the joystick will confirm a selection,
it acts as an "Enter" button.
Softkeys
Below the screen there are 5 buttons, the so
called softkeys. Depending on the actual menu
on the screen they have different functions.
The corresponding function is always displayed
on the screen.