Screen & Video Settings - JOBO GIGA VU EXTREME User Manual

albums that will be copied from CF card.
Whenever you copy data from a CF to the
GVX, the device will create a new album
using this album prefix complemented
with a number as album name. Factory
default is "cf_". You can change it to any
combination of letters. To change the
prefix, move the joystick to the right. Then
a keyboard will appear and you can enter
your personal prefix. See chapter 4.3 for
keyboard description.
3. Menu Color: Select the color used for
highlighting items.
Use the joystick left / right to select your
preferred color.
4. Automatic Caching: Define whether
pictures are generally cached or not.
Caching the pictures means that previews
are generated in order to shorten the time
until you see a picture, for example in a
slide show. These cached photos require
some additional disk space. Use the
joystick left / right to select your preferred
setting.
On:
Whenever a picture is viewed for the
first time it will be cached. Note however
that the GVX does not scan all albums
for caching automatically. If an album is
opened and only a few pictures are viewed,
only these will be cached.
Off:
No automatic caching is performed
when viewing pictures. You still may
cache any album by selecting it and only
cache these pictures. See chapter 7.2.1,
"Generate previews", for more details.
5. Cache compression: Define the
compression of the cached pictures.
Use the joystick left / right to select
your preferred setting. The higher
the compression, the smaller the files
generated will be. So in order to save disk
space choose a high compression.
6. Dim Backlight: Enter the time after which
the backlight will be dimmed. Use the
joystick left / right to select your preferred
16
setting. If the backlight will be dimmed,
press any button to reactivate the screen.
7. Power Off: Enter the time after which the
unit will be switched off automatically.
Use the joystick left / right to select your
preferred setting.
Dimming the backlight reduces battery
consumption. If you enter a value other than
"Never" it is recommended to select a value
other than "Never" in the "Power off" section.
Otherwise, dimming the screen and not
automatically switching off the unit after some
time introduces the risk of not noticing that
the unit is still on and draining the battery
completely.
5.3 Screen & Video Settings
This menu is used to adjust some settings
concerning the video output. Use the joystick
up / down to select one of the items.
To save the new settings, press softkey 5,
"Save".
To leave the menu without saving new settings,
press softkey 1, "Cancel".
Fig. 5.4: Screen "Device Menu – Screen & Video
Settings".
1. Video Output: Select the TV standard
"PAL" or "NTSC" before watching photos or