How To Select Content - JOBO GIGA VU EXTREME User Manual

4.3

How to Select Content

In many cases you will have to select pictures
or songs for copying, deleting, viewing etc. In
all cases the same selecting mechanism is used
which is described below:
Selecting files
For selecting pictures you have two options:
thumbnail selection or file list selection. For all
other types of content i.e. music, movies and
data, only the file list selection is available.
In both cases a small rectangle in front of the
file name resp. at the top left corner of the
thumbnail indicates that this picture is selected.
Fig. 4.3: Files selected in "file list selection"
mode.
Fig. 4.4: Files selected in "thumb view
selection" mode.
12
You can use the joystick to navigate through
the files. Use the joystick up / down to go
through the file names one by one. Use the
joystick left / right to advance one page at
the time. Pressing the joystick will toggle the
actually highlighted file from selected to not
selected resp. the other way round.
The softkeys offer the following actions:
Softkey 1, "All":
Selects all files.
Softkey 2, "None":
De-selects all files.
In case you only want to copy a few files, first
use this option and then manually select the
files you need as described above.
Softkey 3, "Recall":
Recalls the previous selection on this album.
For each album, the GVX remembers the last
selection you made. If, for example, you
select pictures for a slide show, you can re-use
this selection later on for printing the same
pictures.
Softkey 4, "More":
Leads to more options.
First layer:
Second layer:
Third layer:
Second layer:
Softkey 1, "Prev":
This command will bring you to the previous
page of thumbnails / file list.
Softkey 2, "Next":
This command will bring you to the next page
of thumbnails / file list.
Softkey 3, "GoTo":
Use the GoTo command to jump directly to a
specific file.
Third layer:
The From – To option allows you to select or
de-select a continuous block of files. If the
chosen files were not selected prior to the
action, they will be selected afterwards. If the
All – None – Recall
Prev – Next – GoTo
From – To