Advertisement
Quick Links
Before You Begin
J
N
UNIPER
U
PGRADING TO
R
2008.2
ELEASE
O
2008--R
CTOBER
EVISION
This document provides information for upgrading to STRM 2008.2 including:
•
Before You Begin
Upgrading to STRM 2008.2r2
•
Troubleshooting Your Upgrade
•
•
Clearing the Cache
You must upgrade the systems in your deployment in the following order:
Console
•
Caution: The upgrade process must be complete on your STRM Console and you
must be able to access the STRM user interface on your system hosting the
Console before you upgrade any other systems in your deployment.
Remote Event Processors
•
•
Remote Event Collectors
Classification Engines
•
Flow Processors
•
•
Flow Collectors
Before you upgrade to STRM 2008.2, note the following:
•
To upgrade to STRM 2008.2r2, you must be running STRM 2008.2r1. If you are
not running STRM 2008.2r1, contact Juniper Networks Customer Support for
assistance with your upgrade.
Make sure you log out of STRM and any instance of the STRM Administration
•
Console.
Make sure all browsers are closed during the upgrade process.
•
Make sure you upgrade all systems in your deployment hosting VIS
•
components. If you do not upgrade these systems, error messages may appear
in the log files until the affected systems are upgraded.
Custom configuration to the crontab is not maintained after the upgrade. The
•
default crontab configuration is applied by the upgrade process. We
recommend that you backup your crontab configuration prior to the upgrade
using the
crontab –l > /tmp/crontab_backup
the upgrade, do not replace the default crontab configuration with the backup
ETWORKS
STRM 2008.2
2
R
2
Before You Begin
STRM
command. However, after
1
2
R
Advertisement
Related Manuals for Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
Summary of Contents for Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
- Page 1 • To upgrade to STRM 2008.2r2, you must be running STRM 2008.2r1. If you are not running STRM 2008.2r1, contact Juniper Networks Customer Support for assistance with your upgrade. Make sure you log out of STRM and any instance of the STRM Administration •...
- Page 2 You Begin section. This section outlines requirements that must be satisfied before you begin the upgrade process. Go to the Juniper Networks web site to access the STRM 2008.2 software: Step 1 http://www.juniper.net/support Click the Management Software link and log in. Go to the Security Threat Step 2 Response Manager Link to download the software.
- Page 3 Step 3 and restart the upgrade process. For additional assistance, contact Juniper Networks Customer Support. Clearing the Cache You need to clear your cache before you access the STRM interface: Note: Make sure that you have Java Runtime Environment installed on your system.
- Page 4 STRM 2008.2 PGRADING TO If you are using Mozilla Firefox, select Tools > Options > Advanced > Network > Step 3 Clear Now. Note: If you are using Mozilla Firefox, you must clear the cache in Internet Explorer as well as in Mozilla Firefox. Now you can log in to STRM.
- Page 5 Juniper Networks Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks in this document are the property of Juniper Networks or their respective owners. All specifications are subject to change without notice. Juniper Networks assumes no responsibility for any inaccuracies in this document or for any obligation to update information in this document.