Juniper STRM 2008.2 - RELEASE NOTES Release Note page 4

4 STRM Release Notes
Contacting
Customer Support
Supported Devices
and OS Versions
Supported Java
and Browser
Software
Resolved Issues
530-025618-01
To help you resolve any issues that you may encounter when installing or
maintaining STRM, you can contact Customer Support as follows:
• Open a support case using the Case Management link at
http://www.juniper.net/support
Call 1-888-314-JTAC (from the United States, Canada, or Mexico)
•
or1-408-745-9500 (from elsewhere)
STRM 2008.2 supports platforms from multiple vendors.
Networks device families and operating systems that support NSM. The table
shows whether a device requires STRM to forward logs through NSM.
Table 1-1 Supported Juniper Networks Devices and OS Versions
Device Family
ISG with IDP
Firewall/VPN
Standalone IDP
J-series
Secure Access (SA) 6.1
Infranet Controller
(IC)
Note: For STRM to correctly process logs from SA and IC, the logs should be sent
from the devices in WELF format. To enable WELF format on the device: Under
System > Logs > Events > Settings, select the WELF filter for the syslog (STRM)
server entry in this table.
STRM supports the following versions of Java and browsers:
Java version 1.5 and later
•
Internet Explorer version 7
•
• Firefox version 2.0
This section describes the resolved issues in STRM 2008.2:
Changing Network Settings No Longer Causes System Failure
Previously, if you changed your network settings (for more information, see the
Changing Network Settings Technical Note), a failure occurred when you
attempted to access the system. This no longer occurs.
Logs Sent Directly to
OS STRM from Device
6.0, 6.1.0r1b No
6.0, 6.1.0r1 Yes
4.1 Yes
8.5, 9.0, 9.1 Yes
Yes
2.1 Yes
Table 1-1 lists Juniper
Logs Sent
Through NSM to
STRM
Yes
Yes
Yes
No
No
No