Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1 Installation Manual page 23

Step 7
Step 8
Changing the
Network Settings
Step 1
Step 2
Step 3
Step 4
Changing the Network Settings of a Console in a Multi-System Deployment
From the Administrative Console menu, select Configurations > Deploy
Configuration Changes.
Exit from the Administration Console.
Note: If the Administration Console is still active on your system tray, use the
right-mouse button (right-click) to access the menu and select Exit.
Changes are deployed.
To change the network settings, you must:
Log in to the Console as root.
Enter the following command:
qchange_netsetup
The Network Settings window appears.
Using the up/down arrow keys to navigate the fields, make the necessary changes
to the following parameters:
Hostname — Specify a fully qualified domain name as the system hostname.
•
IP Address - Specify the IP address of the system.
•
• Netmask - Specify the network mask address for the system.
Gateway - Specify the default gateway of the system.
•
Primary DNS - Specify the primary DNS server.
•
Secondary DNS - Optional. Specify the secondary DNS server.
•
Public IP - Optional. Specify the Public IP address of the server. This is a
•
secondary IP address that is used to access the server, usually from a different
network or the Internet, and is managed by your network administrator. This
Public IP address is often configured using Network Address Translation (NAT)
services on your network or firewall settings on your network. NAT translates an
IP address in one network to a different IP address in another network.
Email Server - Specify the email server. If you do not have an email server,
•
specify localhost in this field.
Use the TAB key to move to the Finish option. Press Enter.
A series of messages appear as STRM-LM processes the requested changes.
After the requested changes are processed, the STRM-LM system is automatically
shutdown and rebooted.
STRM Installation Guide
19