Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1 Installation Manual page 16

12 I STRM-LM
NSTALLING
Step 12
The Time Zone Region window appears.
Note: The options that appear in this window are regions that are associated with
the continent or area previously selected.
Using the up/down arrow keys, or the page up/page down keys, select your
c
time zone region.
Using the left/right arrow keys, select Next. Press Enter.
d
The Configure STRM-LM window appears.
To configure the STRM-LM network settings:
You must change the displayed default values. Using the up/down arrow keys
a
to navigate the fields, enter values for the following parameters:
- Hostname - Specify a fully qualified domain name as the system hostname.
- IP Address - Specify the IP address of the system.
- Network Mask - Specify the network mask address for the system.
- Gateway - Specify the default gateway of the system.
- Primary DNS - Specify the primary DNS server.
- Secondary DNS - Optional. Specify the secondary DNS server.
- Public IP - Optional. Specify the Public IP address of the server. This is a
secondary IP address that is used to access the server, usually from a
different network or the Internet, and is managed by your network
administrator. The Public IP address is often configured using Network
Address Translation (NAT) services on your network or firewall settings on
your network. NAT translates an IP address in one network to a different IP
address in another network.
- Email Server - Specify the email server. If you do not have an email server,
specify localhost in this field.
Use the TAB key to move to the Next option. Press Enter.
b
The New Root Password window appears.
STRM-LM Installation Guide