EFI bizhub PRESS C6000 Upgrade Manual

Overview
Contents of this kit
Procedures
Copyright 2011 © Electronics for Imaging, Inc.
Upgrading the Fiery PRO
Fiery PRO 80
System Version 2.0
This document describes how to upgrade the Fiery PRO
70-60C-KM Color Server to system software version 2.0.
Notify the network administrator at the customer site that some archived jobs may no longer
print after you install version 2.0 system software.
The term "Fiery PRO
N :
OTE
or Fiery PRO 70-60C-KM Color Server.
80
In addition to this document, this kit contains:
• Two 1GB DIMMs — for upgrading the memory from 2GB to 4GB.
• BIOS Upgrade CD — for upgrading the BIOS from version 1.31 to version 1.55.
• One-time use dongle — for upgrading the BIOS from version 1.31 to version1.55.
• Media Package
– System Software Package — System Software version 2.0 for installation on the
Fiery PRO 80 following the BIOS upgrade procedure.
– User Software Package — User Software for installation on client computers; User
documentation CD; printed release notes; additional documentation.
The list below is a summary; see the complete procedures in the following pages.
To upgrade the Fiery PRO
1. Install the additional DIMMs (see
2. Upgrade the BIOS (see
3. Install system software (see
Installing system software deletes everything on the HDD. Coordinate with the network
administrator at the customer site before installing system software.
4. Verify the product upgrade (see
80
70-60C-KM Color Server to
" is used in this document to refer to the Fiery PRO
80
80 , perform the following procedures in the order shown below.
page 2).
page 3).
page 4).
page 6).
80C-KM or
80 80C-KM or Fiery PRO
Part Number: 45097576
February 17, 2011
*45097576*
80
80C-KM
80