Belkin F5D7050_v3 User Manual page 33

Using the Belkin Wireless Networking Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server . WPA-PSK
(no server) is typically used in home and small-office networking .
1.
From the "Network Authentication" drop-down menu, select "WPA-
PSK" . Then, from the "Data Encryption" drop-down menu, choose
either "AES" or "TKIP", depending on which type was set up in
your router (access point) .
2.
Enter your network key that was set up in your router (access
point) . This can be from eight to 63 characters and can be letters,
numbers, or symbols .
3.
Click "Connect" to finish .
31
1
2
3
4
5
6
7