Advertisement
t_taflation
How
to conneGt
Connect
the audio
and video cables
from the externat
equipment's
output
jacks to the Monitor
input jacks,
as
shown
in the figure.
When
connecting
the Monitor
to extema_ equipment,
match
the jack colors
(Video
= yellow; Audio
Left = white,
and
Audio
Right = red).
How to use
1. Select
the input source
with using the INPUT
SELECT
but-
ton on the remote
control
(If connected
to AAJ INPUT
1,
select
Video
input source).
2. Operate
the corresponding
external
equipment.
Refer to
external
equip_nt
operating
guide.
Camco_er
Video
Game
Set
How
to connect
1. Connect
the DVD video outputs
(Y, PB, P_) to the COMPO=
NENT (Y, Pa, PR) INPUT jacks
on the Monitor
and connect
the
DVD audio outputs
to the AUDIO
INPUT jacks
on the Monitor,
as shown
in the figure.
2. If your
DVD only has an S-Video
output
jack, connect
this to the
S-VIDEO
input on the Monitor
and connect
the DVD audio out*
puts to the AUDIO
tNPUT jacks
on the Monitor,
as shown
in the
figure.
NOTE:
ff your
DVD p_ayer does not have component
video output,
use SWideo.
HOW to U_
1_ Turn on the DVD player, insert
a DVD_
2, Use the INPUT
SELECT
button
on the remote
control to select
Component
1 or Component
2, (If connected
to S-VIDEO,
select
the Video
external
input source,)
3. Refer
to the DVD player's
manua_ for oper_ing
instructions,
• Component
Input
ports
To get better
picture quality,
connect
a DVD player to the com-
ponent
input ports as shown
below,
Component ports
on the Monitor
DVD
Video output ports
on DVD player
12
Plasma
Monitor
Advertisement
