Juniper JUNOS OS 10.4 - XML API OPERATIONAL Supplementary Manual page 6639

Copyright © 2010, Juniper Networks, Inc.
<!ELEMENT lm-lmp-control-channel-received-message-id (#PCDATA)>
<!ELEMENT lm-lmp-control-channel-remote-id (#PCDATA)>
<!ELEMENT lm-lmp-control-channel-sent-message-id (#PCDATA)>
<!ELEMENT lm-lmp-control-channel-state (#PCDATA)>
<!ELEMENT lm-lmp-control-channel-tx-seq-num (#PCDATA)>
<!ELEMENT lm-local-address (#PCDATA)>
<!ELEMENT lm-local-id (#PCDATA)>
<!ELEMENT lm-local-label (#PCDATA)>
<!ELEMENT lm-max-bandwidth (#PCDATA)>
<!ELEMENT lm-min-bandwidth (#PCDATA)>
<!ELEMENT lm-no-cc (#PCDATA)>
<!ELEMENT lm-no-peer (#PCDATA)>
<!ELEMENT lm-output-statistics (lm-sent-packets | lm-retransmit-packets |
lm-tossed-packets)*>
<!ELEMENT lm-packet-count (#PCDATA)>
<!ELEMENT lm-packet-type (#PCDATA)>
<!ELEMENT lm-peer-control-address (#PCDATA)>
<!ELEMENT lm-peer-control-channels (lm-control-channel-info)*>
<!ELEMENT lm-peer-hello-dead-interval (#PCDATA)>
<!ELEMENT lm-peer-hello-interval (#PCDATA)>
<!ELEMENT lm-peer-information (lm-source | lm-sys-id | lm-peer-name | lm-state |
lm-peer-control-address | lm-peer-hello-interval | lm-peer-hello-dead-interval
| lm-peer-received-message-id | lm-peer-sent-message-id | lm-peer-control-channels
| lm-peer-lmp-control-channels | lm-peer-te-links)*>
<!ELEMENT lm-peer-lmp-control-channel-information (lm-lmp-control-channel-local-id
| lm-lmp-control-channel-remote-id | lm-lmp-control-channel-state |
lm-lmp-control-channel-flags | lm-lmp-control-channel-received-message-id |
lm-lmp-control-channel-sent-message-id | lm-lmp-control-channel-rcv-seq-num |
lm-lmp-control-channel-tx-seq-num)*>
<!ELEMENT lm-peer-lmp-control-channels (lm-peer-lmp-control-channel-information)*>
<!ELEMENT lm-peer-name (#PCDATA)>
<!ELEMENT lm-peer-received-message-id (#PCDATA)>
<!ELEMENT lm-peer-root-information (lm-peer-information)*>
<!ELEMENT lm-peer-sent-message-id (#PCDATA)>
<!ELEMENT lm-peer-statistics (lm-peer-name | lm-input-statistics |
Chapter 57: DTD for Routing Protocols Response Tags
6403