Juniper JUNOS OS 10.4 - XML API OPERATIONAL Supplementary Manual page 6411

Xml api operational reference
Table of Contents

Advertisement

Chapter 31: DTD for Interfaces Response Tags
<!ELEMENT dtr-circuit-mode (#PCDATA)>
<!ELEMENT dtr-polarity (#PCDATA)>
<!ELEMENT duplex (#PCDATA)>
<!ELEMENT duplicate-protection (#PCDATA)>
<!ELEMENT dynamic-interface-bandwidth (#PCDATA)>
<!ELEMENT dynamic-profile (#PCDATA)>
<!ELEMENT e3-bert-algorithm (#PCDATA)>
<!ELEMENT e3-bert-bit-count (#PCDATA)>
<!ELEMENT e3-bert-bit-count-overflow (#PCDATA)>
<!ELEMENT e3-bert-elapsed (#PCDATA)>
<!ELEMENT e3-bert-error-bit-count (#PCDATA)>
<!ELEMENT e3-bert-error-bit-count-overflow (#PCDATA)>
<!ELEMENT e3-bert-error-rate (#PCDATA)>
<!ELEMENT e3-bert-induced-error-rate (#PCDATA)>
<!ELEMENT e3-bert-information (e3-bert-period | e3-bert-elapsed | e3-bert-status
| e3-bert-algorithm | e3-bert-error-rate | e3-bert-induced-error-rate |
e3-bert-bit-count | e3-bert-bit-count-overflow | e3-bert-error-bit-count |
e3-bert-error-bit-count-overflow | e3-bert-los-status | e3-bert-los-count |
e3-bert-los-seconds)*>
<!ELEMENT e3-bert-los-count (#PCDATA)>
<!ELEMENT e3-bert-los-seconds (#PCDATA)>
<!ELEMENT e3-bert-los-status (#PCDATA)>
<!ELEMENT e3-bert-period (#PCDATA)>
<!ELEMENT e3-bert-status (#PCDATA)>
<!ELEMENT e3-data-inversion (#PCDATA)>
<!ELEMENT e3-framing (#PCDATA)>
<!ELEMENT eia530-control-signal (mode | to-dce | from-dce | to-dte | from-dte)*>
<!ELEMENT eia530-signal-polarity (dtr-polarity | rts-polarity | dcd-polarity |
dsr-polarity | cts-polarity | tm-polarity)*>
<!ELEMENT encapsulation (#PCDATA)>
<!ELEMENT encryption-algorithm (#PCDATA)>
<!ELEMENT end-vci (#PCDATA)>
<!ELEMENT epd-threshold (#PCDATA)>
Copyright © 2010, Juniper Networks, Inc.
6175

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents