Juniper JUNOS OS 10.4 - XML API OPERATIONAL Supplementary Manual page 6256

Junos 10.4 XML API Operational Reference
6020
<!ELEMENT ancp-config-entry (if-type | record-number | if-name | aid-name |
aid-ipaddress)*>
<!ELEMENT ancp-config-information (ancp-scalar-entry | ancp-config-entry)*>
<!ELEMENT ancp-cos-entry (interface-type | interface-name | interface-index |
shaping-rate | last-update)*>
<!ELEMENT ancp-cos-heading (qos-adjust | cos-state | connect-time | session-time
| rtcreate-time | keepalive-time | rate-update-time | keepalive-timer)*>
<!ELEMENT ancp-cos-information (ancp-cos-heading | ancp-cos-entry)*>
<!ELEMENT ancp-kernel-entry (if-type | record-number | if-name | if-index |
aid-name | aid-ipaddress)*>
<!ELEMENT ancp-kernel-information (ancp-kernel-entry)*>
<!ELEMENT ancp-neighbor (received-syn-count | received-synack-count |
received-ack-count | received-rstack-count | received-port-up-count |
received-port-down-count | received-other-count | sent-syn-count |
sent-synack-count | sent-ack-count | sent-rstack-count |
max-discovery-limit-exceed-count | ip-address | tcp-port | up-time | mac-address
| state | neighbor-subscriber-count | system-instance | peer-instance |
capabilities | adjacency-time | peer-adjacency-time | partition-type |
partition-flag | partition-identifier | dead-time)*>
<!ELEMENT ancp-neighbor-adjacency-timer (#PCDATA)>
<!ELEMENT ancp-neighbor-configuration-entry (record-number | ancp-neighbor-ip |
ancp-neighbor-discovery-mode | ancp-neighbor-ietf-mode |
ancp-neighbor-adjacency-timer | ancp-neighbor-maximum-discovery-entries)*>
<!ELEMENT ancp-neighbor-configuration-information
(ancp-neighbor-configuration-entry)*>
<!ELEMENT ancp-neighbor-discovery-mode (#PCDATA)>
<!ELEMENT ancp-neighbor-ietf-mode (#PCDATA)>
<!ELEMENT ancp-neighbor-information (ancp-neighbor)*>
<!ATTLIST ancp-neighbor-information junos:style CDATA #IMPLIED>
<!ELEMENT ancp-neighbor-ip (#PCDATA)>
<!ELEMENT ancp-neighbor-maximum-discovery-entries (#PCDATA)>
<!ELEMENT ancp-scalar-entry (qos-adjust | ietf-mode | adjacency-timer |
maximum-discovery-entries-neighbor)*>
<!ELEMENT ancp-statistics-information (neighbor-count | subscriber-count |
received-syn-count | received-synack-count | received-ack-count |
received-rstack-count | received-port-up-count | received-port-down-count |
received-other-count | sent-syn-count | sent-synack-count | sent-ack-count |
sent-rstack-count | accept-count | accept-fail-count | accept-config-deny-count)*>
<!ELEMENT ancp-subscriber (access-loop-identifier | access-loop-remote-identifier
| interface | interface-type | access-aggregate-circuit-identifier |
access-aggregate-circuit-binary-identifier | dsl-type | actual-net-data-upstream
| actual-net-data-downstream | minimum-net-data-upstream |
minimum-net-data-downstream | maximum-net-data-upstream |
Copyright © 2010, Juniper Networks, Inc.