Table of Contents
Advertisement
Junos 10.4 XML API Operational Reference
Audience
ccxxx
Junos XML management protocol and NETCONF XML Management protocol client
applications can use to request information about the operational status of a router. The
tag elements are equivalent to operational mode commands in the Junos OS
command-line interface (CLI).
NOTE: For additional information about the Junos XML API software—either
corrections to or information that might have been omitted from this
guide—see the software release notes at
This reference is designed for Juniper Networks customers who want to write custom
applications for monitoring routing platforms that run the Junos OS. It assumes that you
are familiar with basic terminology and concepts of XML, with XML-parsing utilities such
as the Document Object Model (DOM) or Simple API for XML (SAX), and with the Junos
OS command-line interface (CLI).
In addition, you need a broad understanding of networks in general, the Internet in
particular, networking principles, and network configuration. You must also be familiar
with one or more of the following Internet routing protocols:
Border Gateway Protocol (BGP)
Distance Vector Multicast Routing Protocol (DVMRP)
Intermediate System-to-Intermediate System (IS-IS)
Internet Control Message Protocol (ICMP) router discovery
Internet Group Management Protocol (IGMP)
Multiprotocol Label Switching (MPLS)
Open Shortest Path First (OSPF)
Protocol-Independent Multicast (PIM)
Resource Reservation Protocol (RSVP)
Routing Information Protocol (RIP)
Simple Network Management Protocol (SNMP)
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by the
instructions provided by the documentation.
.
http://www.juniper.net/
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
