Table of Contents
Advertisement
Contents
Copyright © 2010, Juniper Networks, Inc.
—Ping label-switched path
<mpls>
—Ping VPLS MAC address
<vpls>
—Number of ping requests to send
<count>
—Delay after sending last packet
<wait>
<no-resolve>
—Don't attempt to print addresses symbolically
—Send requests rapidly (default count of 5)
<rapid>
<record-route>
—Record and report packet's path (IPv4)
—Display incoming interface of received packet
<detail>
<do-not-fragment>
—Don't fragment echo request packets (IPv4)
—Intermediate loose source route entry (IPv4)
<loose-source>
<interface>
—Source interface (multicast, all-ones, unrouted packets)
—Delay between ping requests
<interval>
<source>
—Source address of echo request
—Hexadecimal fill pattern
<pattern>
<size>
—Size of request packets
—Use strict source route option (IPv4)
<strict>
<strict-source>
—Intermediate strict source route entry (IPv4)
—IP time-to-live value (IPv6 hop-limit value)
<ttl>
<verbose>
—Display detailed output
—IP type-of-service value
<tos>
<bypass-routing>
—Bypass routing table, use specified interface
—Force ping to IPv4 destination
<inet>
<inet6>
—Force ping to IPv6 destination
—Routing instance for ping attempt
<routing-instance>
<host>
—Hostname or IP address of remote host
—Name of logical system
<logical-system>
<request-ping-ethernet>
—Ping to an ethernet host by unicast mac address
Chapter 2: Summary of Operational Request Tag Elements
669
Advertisement
Table of Contents
