Request-Power-Off - Juniper JUNOS OS 10.4 - XML API OPERATIONAL Supplementary Manual

Junos 10.4 XML API Operational Reference
Contents
<request-power-off>
Usage
Description
Contents
706
—Layer 2 VPLS name
<instance-name>
—Destination MAC address
<destination-mac>
—Source IP address
<source-ip>
—Learning VLAN identifier
<learning-vlan-id>
<control-plane-response> —Request VPLS OAM responses using the control plane
—Name of bridge domain
<bd-name>
<count> —Number of ping requests to send
—Display detailed output
<detail>
<logical-system> —Name of logical system
<rpc>
<request-power-off>
<at>at</at>
<in>in</in>
<message>message</message>
<power-off>power-off</power-off>
<media>media</media>
<slice>slice</slice>
<both-routing-engines/>
<other-routing-engine/>
</request-power-off>
</rpc>
Power off the system
<at> —Time at which to perform the operation
fpc - Power off FPCs
disk - Boot off hard disk
compact-flash - Standard boot off flash device
pcmcia-flash - Boot off removable PCMCIA device
lan - Network boot via bootp
usb - Boot off USB device
recovery-compact-flash - Boot off recovery partition of compact flash
removable-compact-flash - Boot off removable compact flash device
external - Boot from external flash
Copyright © 2010, Juniper Networks, Inc.