Table of Contents
Advertisement
RSVP-TE
Service Manager
SNMP
SRC Software and SDX Software
'bad if' logs reported when QoS Agent checks for L2TP client interface type
[Defect ID 89711]
Unable to display scheduler hierarchy or egress-queue rate for LM4 tunnel
server ports. [Defect ID 89692]
ES2 10G LM in slot 0 crashed - reset type: panic arg (0xda) file: templateRam.cc
line: 305 [Defect ID 90093]
QoS has a limit of 4 Gbps on tenGigabitEthernet interface for maximum rate.
[Defect ID 90097]
When you change or re-attach a qos-profile on an ATM interface, the minimum
rate of the best effort traffic is displayed incorrectly to be a lower value. [Defect
ID 89892]
On E Series Routers that have not had any SRP switch or cold boot for over a
year, SRP crashes because of a deadlock in QoS manager. [Defect ID 89997]
Few RSVP LSP can be inactive after network churn. [Defect ID 89616]
Large Acct-Session-Time value in Accounting-Stop with Service Manager macro
are defined. [Defect ID 89728]
Service Manager volume based service sessions do not expire. [Defect ID
89810]
Service Manager triggers continous PLR (protocolLayerRegistry) events
resulting in peak SRP CPU utilization of 100%. Service activation for a
subscriber also fails. [Defect ID 90282]
SNMP walk on IfTable causes SRP to stall causing watchdog reset with L2TP
configuration. [Defect ID 185087]
SNMP walk on the juniQosSvlanIdTablePortUid and
juniQosSvlanIdTableSvlanId objects result in an infinite loop. [Defect ID 89357]
Problem with re-attaching policies on SDX managed DSI interfaces after a line
module reload. [Defect ID 87326]
Slot-7 SRP reset type: processor exception 0x700 (program); task:
sssClient_Data_1 [Defect ID 89863]
Plugin initialization order causing invalid reference counts on the address
mode indication of the interface. [Defect ID 89832]
Release 10.3.1
Resolved Known Problems
59
Advertisement
Table of Contents
