Sample Command Line Scripts - FARONICS DEEP FREEZE MAC Manual

• The target computer(s) for the task must be specified.
• The target computer(s) must have Deep Freeze installed.
• A user on the target computer must be specified to run the command.
The following figure shows the sample output from the
NOTE: The Display all output checkbox must be selected in the Apple Remote Desktop Edit Task window in
order to show the target' s status.
The following figure shows the activateSchedule task set to run as the current console user on the target
computer:
Each task must be edited to use a Deep Freeze user name and password for the target computer(s). In
the above example,
admin
name and password may already be present in the task, depending on the settings that were specified
in Deep Freeze Assistant.
The following tasks must run as root on the target computer. Otherwise, insufficient
permissions will cause the task to fail.
• createThawSpace
• mapAllUsers
• removeThawSpace
• removeAllThawSpace
Sample Command Line Scripts
The Deep Freeze Mac tasks give network administrators increased flexibility when managing
Deep Freeze Mac workstations. These tasks can be run with several different third-party enterprise
management tools and/or central management solutions; this includes executing commands in
is the Deep Freeze user name and
• resizeThawSpace
• status
• uninstall keepThawSpace
• uninstall
function.
Status
is the Deep Freeze password. The
admin
33