Scanning Via Faronics Core Console - FARONICS ANTI-VIRUS Manual

|
42 Using Faronics Anti-Virus

Scanning via Faronics Core Console

Faronics Anti-Virus User Guide
Scanning can be done manually, as scheduled in the Anti-Virus Policy or by scheduling a task via
Faronics Core Console. Complete the following steps to manually scan workstation(s) via Faronics
Core Console:
1. Launch Faronics Core Console.
2. Go to Workstation List pane.
3. Right-click on one or more workstations and select Scan.
• Select Scan>Quick for a quick scan.
• Select Scan>Deep for a deep scan.
• Select Scan>Abort to abort an ongoing scan.
• Select Scan>Pause to pause an ongoing scan.
• Select Scan>Resume to resume a scan that was Paused.
The scan progress (% Scan Complete) is displayed in the Workstation List pane in Faronics Core
Console.
If there is more than one Loadin installed, the right-click contextual menu for
Faronics Anti-Virus can be accessed by right-clicking a workstation, selecting
Faronics Anti-Virus and then selecting the particular action.