Post-Installation Steps; Evaluation Version Information; Deployment Information - FARONICS ANTI-EXECUTABLE Getting Started Manual

STANDARD
7. Restart the workstation after installation has completed.
8. After the restart, access Anti-Executable's settings by holding down the Shift key and double-
clicking the Anti-Executable icon in the Windows System Tray. Alternatively, the CTRL + ALT
+ SHIFT + F10 hotkey sequence can be used.
9. If you did not select the check box in step 6, create a White List on the White Lists tab and
enable Anti-Executable from the Status tab. Refer to the Anti-Executable Standard user guide
for detailed information about the product.
After the workstation restarts, the only indication that Anti-Executable is installed is the Anti-Executable
icon that appears in the System Tray next to the clock.
The evaluation version of Anti-Executable Standard expires 30 days after installation.
Anti-Executable will not protect your computer when it is expired.
To deploy Anti-Executable to workstations using the Silent Install System or as part of an imaging
process, please refer to the user guide.
The Anti-Executable Standard User Guide is available at:
Free technical support is available to you during your evaluation period. Contact our Technical Support
department at 800-943-6422 or through
For further product, pricing, and ordering information, please contact the Customer Service
Department at (800) 943-6422 or by email at
http://www.faronics.com/library
http://www.faronics.com/support
customerservice@faronics.com
Getting Started