Roland S-4000S - ARCHITECTS AND ENGINEERS Specification page 2

Architects & Engineers Specifi cation
S-4000S Digital Snake System
S-4000 Digital Snake System Main Specifications
S-4000S-3208 40CH I/O MODULAR RACK
Number of Channels 32 in 8 out
Sample Rate: 96.0 kHz
AD Conversion
Signal Processing: 24 bit
Sample Rate: 96.0 kHz
DA Conversion
Signal Processing: 24 bit
Frequency Response
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic
0.05 % or less
Distortion + Noise (Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
Dynamic Range 110 dB
Cross Talk
-80 dB
-65 to -10 dBu (PAD: Off) -45 to +10 dBu (PAD: On)
Nominal Input Level
(1 dB step, Max. +28 dBu)
PAD
20 dB On/Off
Input Impedance 20 k ohms
Nominal Output Level
+4 dBu, Max. +22 dBu
Output Impedance
150 ohms
Recommended Load
10 k ohms or greater
Impedance
Residual Noise Level
-90 dBu
(IHF-A, typ.)
Equivalent Input
-128 dB
Noise Level (E.I.N.)
375 microseconds when using REAC cable only
Network Latency
(AD - REAC - DA Latency: about 1.2 ms)
S-4000H 8X32 FOH UNIT
Number of Channels 8 in 32 out
Sample Rate: 96.0 kHz
AD Conversion
Signal Processing: 24 bit
Sample Rate: 96.0 kHz
DA Conversion
Signal Processing: 24 bit
Frequency Response
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic
0.05 % or less (Input Gain: +4 dBu, 22 to 20000 Hz)
Distortion + Noise
Dynamic Range
110 dB
Cross Talk
-80 dB
Nominal Input Level +4 dBu, Max. +22 dBu
Input Impedance 30 k ohms
Nominal Output Level
+4 dBu, Max. +22 dBu
Output Impedance
600 ohms
Recommended Load
10 k ohms or greater
Impedance
Residual Noise Level
-90 dBu
(IHF-A, typ.)
375 microseconds when using REAC cable only
Network Latency
(AD - REAC - DA Latency: about 1.2 ms)
Input: 1 (DB-25 type, balanced, 8 channels)
Output: 4 (DB-25 type, balanced, 32 channels each)
Connectors REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
S-4000R REMOTE CONTROL UNIT
Connector
Remote Connector: 1 (RS-232C, DB-9 type)
Indicators CLIP Indicators, SIG Indicators, POWER Indicator, REAC Indicator, CTRL Indicator, Level Meter
Power Supply Supplied from connected device. (S-4000S, S-4000H; through the remote cable)
Dimensions 215.0 (W) x 87.0 (D) x 54.6 (H) mm, 8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches
Weight
0.8 kg, 1 lb 13 oz
Operation Temperature 0 to +40 degrees celsius, +32 to +104 degrees Fahrenheit
Accessories Remote Cable (3 m), Rack Mount Brackets, Installation Manual
Connectors
Indicator
AC Power Supply
DC Power Supply
Power Consumption
Current Draw
(for an optional external
power supply unit;
Model S-240P)
Phantom Power
Dimensions
Weight
Operation Temperature
Accessories
Indicators
AC Power Supply
DC Power Supply
Power Consumption
Current Draw
(for an optional external
power supply unit;
Model S-240P)
Dimensions
Weight
Operation Temperature
Accessories
801 West Orchard Drive, Suite 3
Bellingham, WA 98225
Input: 32 (XLR type, balanced, phantom power, 4 ch input module x 8)
Output: 8 (XLR type, balanced, 4 ch output module x 2)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
130 W
6 A
+48 V / 14 mA (each input on SI-AD4, remote controlled)
482.0 (W) x 336.0 (D) x 266.4 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
17.0 kg, 37 lbs 8 oz
0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
Power Cord, REAC cable (10 m, Cat5e crossover cable)
Adhesive-backed number label sheets, REAC Connector Covers
Ferrite Cores, Owner's Manual
* 0 dBu = 0.775 Vrms
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
70 W
6 A
482.0 (W) x 386.7 (D) x 133.0 (H) mm
19 (W) x 15-1/4 (D) x 5-1/4 (H) inches
9.4 kg, 20 lbs 12 oz
0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
Power Cord, REAC Connector Covers, Ferrite Cores,
Connector Guard, Screws for Connector Guard
Installation Manual
* 0 dBu = 0.775 Vrms
WWW.ROLANDSYSTEMSGROUP.COM
TOLL FREE: 800.380.2580 • FAX: 800.634.8202