D-Link VTA-VR User Manual page 22

Appendix A - Troubleshooting
During the startup process you may notice that the Power light on the front of the VTA is
blinking. These blinks indicate that the VTA is booting up with Vonage service. You may
find the following blink sequences helpful to you:
1 blink (blink, pause, repeat)
2 blinks (2 blinks, pause, repeat)
3 blinks (3 blinks, pause, repeat)
4 blinks (4 blinks, pause, repeat)
Rapid Blinking
Solid
D-Link VTA User Manual
VTA is powering up
VTA is obtaining an IP address
VTA is obtaining configuration from Vonage
VTA is registering with Vonage
Downloading/upgrading firmware (do not power down)
Startup process is complete