Technical Specifications - D-Link DSN-4100 Technical Specifications

D-Link's volume virtualization technology utilizes the concept of storage
extents, which are the fundamental building blocks used to enable
features such as RAID, online capacity expansion, volume reconfiguration
and migration. Each disk drive can contain multiple and divergent RAID
configurations instead of requiring dedication to a single RAID set. This
technology allows for the support of mixed disk drive capacities for volume
creation. Volume capacity expansion, volume reconfiguration, and RAID level
migration are performed online with minimal impact to users. Users can

Technical Specifications

1GbE Copper
Features
Drive Bays
Drive Interface Support
System Memory
Cache Memory
Battery Backup for Cache
Bandwidth
Storage Capacity
Operating Systems Supported
Please see support.dlink.com for latest support information
Supported NICs, iSCSI Accelerators
and iSCSI HBAs
Please see support.dlink.com for latest support information
iSCSI Network Interface
Host Interface
Connections
CHAP Authentication
quickly deploy a SAN using inexpensive SAS or SATA disk drives and simply
add more drives as needed.
An iSCSI SAN array can prove to be a valuable tool to supplement a network
storage foundation. Whether providing a low-cost block-based solution for data
backup and recovery, replacement of Direct Attached Storage (DAS), providing
secondary online storage, or providing up to 850MB/s bandwidth for security
surveillance and video post-production applications, the DSN-4000 series may
provide the performance and functionality needed.
DSN-4100
• Four 1GbE Copper
• 16, Expandable with DSN-4000 expansion arrays up to 80
• SAS/SATA
• 512MB Standard
• 512MB
• Standard (approximately 72 hours on full charge)
• Up to 425MB/s
• Supports 48TB 2 Capacity with 3TB
• Additional DSN-4000 expansion arrays support up to 240TB
• Windows Vista® 32-bit & x64 (Ultimate & Enterprise)
w/Built-in iSCSI Initiator
• Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard
& Enterprise) with v2.07 iSCSI Initiator or later
• Windows Server 2008 Enterprise 32 & 64-bit with
Built-in iSCSI Initiator
• Windows XP Pro® 32 & 64-bit with v2.07 iSCSI Initiator
or later
• Windows 2000 Advanced Server
– No MS iSCSI Initiator support, Qlogic HBA only
• Red Hat® 7.3
• Red Hat Enterprise AS update 5 (64-bit)
• Intel® Pro 1000MT & XT [1GbE]
• Intel Pro 10000 CX4 [10GbE]
• Myricom 10G-PCIE-8A-C+E [10GbE]
• Chelsio® S310X-SR-XFP [10GbE]
• Neterion® Xframe® II & Xframe E [10GbE]
• iSCSI Draft 20 Compliant Initiator
• 1,024 hosts
• Yes
DSN-4000 Series
DSN-4200
• Eight 1GbE Copper
• 1GB
• Up to 850MB/s
2 Hard Drives
total capacity
2
• Red Hat Enterprise 5 update 2 (64-bit)
• SuSE® Professional 9.3 32-bit
• SuSE Enterprise Server 10.2 32-bit
• Sun Solaris® 10 build 6/06
• IBM AIX 5L
• Microsoft Hyper-V
• VMware vSphere® 5
• VMware ESX Server® 3.02 & 3.5
• VMware ESX Server® 4.0 & 4.1
• Virtual Iron v4.2
• Citrix XenServer® v4
• Mac OS X® (10.4 & 10.5)
• Alacritech® SES2104ET
(drivers: SNP 9.1.0.1092 & 7.3.1.0)
• Alacritech SES2102ET
(drivers: SNP 9.1.0.1092 & 7 .3.1.0)
• QLogic® 4010C, 4052C, & 4062C
iSCSI SAN Array