Features - NETGEAR GS724T - ProSafe Switch Hardware Manual

Features

The following list identifies the key features of the NETGEAR GS724T Gigabit Smart Switch.
•
Twenty-four 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports
•
Two SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity
•
Automatic detection of SFP GBIC modules
•
Reset Button.
•
Factory Defaults Button.
•
Administrative switch management including:
♦
IEEE 802.1Q Tag VLAN with up to 24 VIDs ranging in 2 to 4K
♦
Port-based VLAN with up to 24 groups, any one port can belong to different VLAN groups
♦
IEEE 802.1p QoS support, 4 priority queues per port
♦
IEEE 802.3ad Link Aggregation support
♦
Web-based management with embedded HTTP server provided
♦
Supports port-setting function which allows user to enable/disable each port, set speed, duplex mode and device follow control
♦
Support Auto-Discovery application program for discovering and managing the switches on the network
♦
Support flash upgrading, configuration backup/restore and factory reset
♦
IEEE 802.1D Spanning Tree Protocol
♦
RFC 1157 SNMP v1
•
Full compatibility with IEEE standards:
♦
IEEE 802.3i (10BASE-T)
♦
IEEE 802.3u (100BASE-TX)
♦
IEEE 802.3z/ab (1000BASE-X, 1000Base-T)
♦
IEEE 802.3x (full-duplex flow control)
•
Auto-sensing and auto-negotiating capabilities for all ports
•
Auto Uplink™ on all ports to make the right connection
•
Integrated address Look-Up Engine, supports 8K absolute MAC addresses
•
Full- and half-duplex functions for all RJ-45 ports
•
Store-and-Forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss/frame drops:
♦
Half-duplex back-pressure control
♦
Full-duplex IEEE 802.3x pause frame flow control
•
LED indicators for port status monitoring:
♦
Power LED to indicate power on/off status
♦
Link LED to indicate link status and activity
♦
Dual-color Mode LED to indicate speed, activity and duplex mode
•
Flexible installation:
♦
Standalone desktop installation
♦
19-inch standard rack-mount
•
Standard 1U case size
Page 6 of 20