Front Panel Display; Snmp Agent - Cisco 3005 - VPN Concentrator - Gateway Operation Manual

The following functions may also be performed on the system information page:

Front Panel Display

Check this box to disable (lock out) the front panel controls.
Remote Desktop
Check this box to allow remote desktop access to the encoder.
Expired User Accounts
Click the Delete button to delete any user accounts that have expired.
Inactive User Accounts
Click the Disable button to disable accounts that have been inactive.

SNMP Agent

Check this box to start the SNMP v2 agent service. Unchecking this box will stop
the service. For more information about the encoder settings that can be viewed
and modified through SNMP, see the MIB documentation in Appendix A.
Encoding parameters may be changed using SNMP sets while Cisco
Media Processor is encoding. However, the values will not be applied
(used) until encoding has been stopped and restarted.
NOTE:
If you click the Add button in any of the following SNMP sections, you
may be asked by your browser to temporarily allow scripted windows.
Click the bar above the page to allow the window, then click Add
again to display the window and type the appropriate input.
NOTE:
SNMP Communities
The display area for SNMP communities lists all accepted communities. To add a
community, click the Add button and type the name in the scripted window:
To assign rights to the community, click the community name to display the
C I SCO S3 0 00 / S 50 0 0 S ER I E S M E D I A PRO C E S SO R S
33