Discovering Switches - NETGEAR GS105E-100NAS - Prosafe Plus 5PORT User Manual

Discovering Switches

When the utility is launched, it immediately searches the network for ProSafe® Plus switches.
Note: Local PC firewall applications such as Symantec Endpoint
Protection can prevent the utility from communicating with the
switches. If the utility is unable to discover your switches and you are
using a local firewall, you will need to turn off the firewall function in
order for discovery to work.
Within a few seconds the utility will discover and list all ProSafe® Plus switches in your
network or in the same broadcast domain. Discovery will continue through the network until
blocked by a router or firewall.
The discovered switches are displayed as shown below.
You can now select a switch to configure or display its status.
At this point you can select an alternate language for the Utility user interface. Click on the
Select Language pull down menu and click on the desired language. You will be asked to
restart the Utility to enable the selected language.
6 | Chapter 1: Getting Started
ProSafe Unmanaged Plus Switch Configuration Utility User Guide