Table of Contents
Advertisement
ProSafe Unmanaged Plus Switch Configuration Utility User Guide
Rate Limiting
You can limit the rate at which the switch accepts incoming data and the rate that it
retransmits outgoing data. you can set rate values. The rate choices vary depending on the
switch model.
Rate limiting can be set for a port in addition to other QoS settings. If a port has a rate limit
set, the switch will restrict the acceptance or retransmission of data to the values configured.
To configure Rate Limiting:
1.
Select System and click on the radio button for the switch you want to configure.
2.
Select QoS > Rate Limit. The QoS Rate Limit screen displays.
3.
Select one or more ports then select ingress and egress rates to assign.
4.
Click Apply. The rates will be displayed opposite the selected ports.
5.
Repeat for the remaining ports.
Chapter 4: Quality of Service Configuration
| 31
Hide quick links:
Advertisement
Table of Contents
