Table of Contents
Advertisement
3. Press Store (on keyboard models) or Edit/Store (on rack-mount models). The PC2's
4. Skip to Step 5 if you want to dump the demo. Otherwise press Enter to delete the demo.
5. Press the Right cursor button. The display asks if you want to dump the current demo.
6. Press Enter to start the dump. On keyboard models, the LED in the MIDI Xmit button
Bug Fixes Since Version 2
Sample Playback
Version 3 fixes a sample playback problem that occasionally caused programs containing
reverse-playback samples to trigger the wrong sample when there were many notes active.
Volume of High Notes in Electric Piano Programs
The following programs have been adjusted to prevent a drop in volume in notes from C 6 up.
Bank
Fixes to Other Programs in Bank 0
In Programs 110 Upright Bass 1 and 111 Upright Bass 2, pitch bend no longer affects the ride
cymbal. In Program 069 Touch Strings, Note B 7 no longer distorts.
Mono Pressure Remap
When your PC2 is in MIDI Receive mode, the MIDI Controller Mono Pressure now gets
remapped to the zones in a setup like other Controllers.
KB3 Percussion and Non-KB3 Programs
Switching to Internal Voices mode from KB3 mode now resets the appropriate MIDI Controllers
(specifically Controller 73, which is the Perc button in KB3 mode) so that they no longer affect
programs in Internal Voices mode (for example, the attacks on some guitar programs).
display asks you if you want to delete the current demo.
When it's gone, the display shows
Cancel instead of Enter; this returns you to Demo mode.
lights to indicate the data flow. When the dump is finished, the display shows
Demo|Dumped!
briefly, then returns to the
ID
0
017
Serious Classic
0
019
Hard E Piano
0
028
Wurly Road
6
016
Mello E Piano
6
017
Tines Square
6
018
Brunch In Seoul
6
020
Barking Tines
Deleted!
If you decide not to delete the demo, press
Dump|Demo?
Program
Version 3 Software for the PC2
Bug Fixes Since Version 2
prompt.
11
Advertisement
Table of Contents
