Download Print this page

Kurzweil MARK 10 - EASY Easy Manual page 2

Advertisement

4a. Set-up Auto accompaniment ¥Choose any style (#4) ¥Press KEY START
button (in AUTO ACCOM. section) ¥To the immediate left of that, press the
BASIC button ¥Play ONE KEY (perhaps a low C) in left hand to start
accompaniment ¥Add Intro, Variation, etc. (in STYLES section) ¥Save as a
PANEL SET to recall immediately (see #13).
4b. Change chord recognition mode ¥Press the button below BASIC twice
until ADVANCED or CHORD/INV is lit (in the AUTO ACCOMPANIMENT
section) ¥ Repeat instructions to 4a and ignore step 3. Play full chord instead
of individual note to start style.
5. Record your own song ¥Press the SONG 1 button in the RECORDER section
(if the TRACK buttons below it are lit, there is a song already there. If so, push
the SONG 2 button or until you find an empty song (no lights below in
TRACK 1-8). ¥If all songs are full, see instructions to #6 ¥Select your
instrument sound ¥Press the RECORD button. Track 1 light should flash
¥Press the PLAY/PAUSE button and begin to play. ¥When finished, press the
STOP button ¥Press the PLAY/PAUSE button to hear your recording.
5a. To add more tracks ¥Select new sound ¥Press the RECORD button (track 2
light should flash) ¥Press the PLAY/PAUSE button and begin to play. ¥When
finished, press the STOP button. You have a maximum of 6 more tracks to
record on.
5b. Punch-in ¥Press the PUNCH IN button (in RECORDER section). ¥Press
the track you desire to punch in (1 through 8) ¥Start the procedure by pressing
the PLAY button ¥Press the PUNCH IN button at the moment you choose to
rerecord. ¥Begin playing ¥Press the PUNCH IN or the STOP button again to
STOP rerecording.
6. Erase all existing songs in Kurzweil's RECORDER section ¥Find the MIDI
button (in OPTIONS section). ¥While holding down the MIDI button (with
your left hand), press the highest white key (C) with your right hand. All
lights on the keyboard will flash and momentarily turn off. After the lights
come back on, all songs in the RECORDER section will have been deleted.
7. To format a blank disk ¥Press the Format button (in OPTIONS section)
¥Press the button under 'Y' ¥Look at your floppy disk. If 'HD' appears on the
upper right side of the metal slider, ¥Insert disk into the drive on right side
¥select the button under 'H'. If no 'H' was on diskette, select 'L' ¥Wait until
disk is formatted
8. Load one (1) prerecorded song from disk into keyboard ¥Insert disk ¥Press
the LOAD SONGS button (in DISK section) ¥Press the UP button under the
word ALL ¥Continue to press the UP/DOWN buttons to find the song
number you want to load ¥Press any flashing SONG button (in the
RECORDER section) to choose destination of song. ¥Wait until song loads
2

Advertisement

loading

This manual is also suitable for:

Mark 110 - easyMark 150 - easyMark 10