Kurzweil K2500 - RELEASE NOTES V2.5 Release Note page 11

EditProg:EQ
VolAdjust
Provides an overall volume adjust for the KB3 model. Use this parameter to "normalize" KB3 programs with
other programs.
BendRange
Controls the pitch bend range of this KB3 program.
Sustain
Set "On" or "Off" to enable or disable response to MIDI sustain (CC#64).
Sostenuto
Set "On" or "Off" to enable or disable response to MIDI sostenuto (CC#66).
EditProg:EQ
When you press the EQ soft button, you'll see a page that at first glance looks quite similar to a regular K2500
Program's algorithm page. The four boxes on this page, however, represent two shelving bands of equalization
and two parametric bands. The KB3 EQ offered here, though, is not implemented as a true EQ section, instead
it adjusts the volume of the tone wheels based on frequency. If the tone wheels are based on sine waves, then
this acts a lot like a real EQ.
Each EQ section has Gain (G), Frequency (F), and Width (W) controls. Frequency controls the center
frequency of the band. Width controls the bandwidth. Gain controls the amount of boost or cut.
910304, Rev. B
11