Burg Wächter PointSafe Version E Quick Start Manual

Important Notes
Please note the factory set codes are:
Master Code: 12345678 (factory set)
168 (factory set)
User Code:
This PointSafe can be operated in both home mode and
hotel mode:
Home mode:
The safe can be operated using one master code and one
user code. Please note you must change both the factory
set codes (master and user codes) to secure
Hotel mode:
The safe can be placed into hotel mode and be operated
using one user code—this can be programmed by the
guest. The user code will be automatically deleted when
the door is open for five minutes or more. The master code
will always remain programmed and can be used to
open the safe or erase a guest programmed user code.
Please note you must change the factory set master
code to secure the safe.
Code Requirements:

• Master code must have 8 digits.

User code can have between 3 and 6 digits.
Hotel Mode
Guide
Step-by-step
BURG
WÄCHTER
PointSafe
Guest Guide
www.burgsafes.co.uk
Technical Support
If you require technical assistance with this safe please
contact our UK support team on:
Tel:
01274
support@burgsafes.co.uk
Email:
Web: www.burgsafes.co.uk
Address:
Burg-Wächter UK / Sterling Locks Ltd
Eurocam Technology Park, Chase Way
Bradford, West Yorkshire
the safe.
BD5 8HW
Warranty
This Burg-Wächter safe is covered under a limited one year
warranty and is non-transferable covering only the original
end purchaser. An original proof of purchase from the
retailer is required for warranty service.
What is not included under the warranty:

Normal wear and tear of product use

Misuse, lack of care, mishandling, accident, abuse or
other abnormal

Use of the product other than for its intended purpose

Damage caused by improper or unauthorized repair
or maintenance

Product that has been
Before you begin:
Please read the "Home Mode Guide" (overleaf)
instructions first before attempting to programme the
safe into hotel mode.
Hotel Mode:
This safe can be set to "Hotel Mode" which allows guests
to program their own user code to access the safe.
Understanding the difference between master code
and user code:
Master code:
Used to administer

• Gaining access to safe when a guest has forgotten
their password

• Gaining access to the safe when a guest leaves the
safe door locked on vacating the room

• Changing the master code

Erasing guest set passcode
The master code should
guests—for security reasons only authorised
employees should have access to the master code.
User code:
A user code is created by the hotel guest to access the
safe. The master code will always override a user code.
The user code is reset when the safe door is left open for
five or more minutes. Programmed user code will be
erased.The master code will always remain
programmed.
Guest Instructions:
A code must be programmed by the guest to lock this
safe. Please follow these simple steps:
Lock Safe:
A code must between 3 and 6 digits in length:

Close the safe door

Press "ENTER" button

Enter code (between 3 and 6 digits) using keypad

Press "ENTER" button

Press "CLOSE" button
•
The safe will now lock and can be opened using the
programmed code.
Unlock Safe:
The code used to lock the safe must be used to unlock
the safe:

• Press "ENTER" button

• Enter programmed code using keypad

• Press "ENTER" button
The safe is now unlocked and the door will open
automatically.
Departing Guest:
When departing, please:

Unlock the safe
•

Remove all contents
•

Leave the safe door open with the bolts in the
open position

Any programmed
the door is left open for five minutes or longer
395 333
use
modified or altered
the safe, this could include:
never be shared with
inside the safe
user code will be deleted when
oo
i 00.
Step 1:
Programme safe into hotel mode:
The safe door must be open and bolts extended to
programme hotel mode. To do this, open the safe
(see Home Mode overleaf), then with the door open,
press the "CLOSE"button to extend the bolts.
The safe by default will be in Home mode—
to programme hotel mode, please follow these steps:

Press "ENTER" button

Display will say "Hello" followed by "Code"

Enter your eight digit master code

Press "ENTER" button

The display with show "PASSI" and then countdown
for I Oseconds. Pressthe "ENTER' button during this
countdown to enter programming mode

Enter the programme code "16805"

Press "ENTER" button

Display shows "SET-05" to confirm the safe is now
programmed to hotel mode.

The door should be left open for guests to
programme their own user code.
Returning Safe to Home Mode:
Should you wish to re-programme the safe back to Home
Mode, please follow the steps above, using programme
code "16800" to set home mode.
The display will show "SET-00" when home mode is
successfully programmed.
Lock Keypad Diagram
LCD DISPLAY
3
c
SET
9
HIM
A: ENTER —Press to input entry
B: CLOSE—Locks safe door or cancels key entry
C: SET—Set time (safe door must be open and bolts extended to use)
D: HIM—Used to set the hours and minutes when adjusting clock
B
ENTER