Hamilton Beach 950 Operation And Maintenance Manual
Drink mixer
Hide thumbs
Also See for 950:
- Operation and maintenance manual (24 pages) ,
- Manual (66 pages) ,
- Manual (41 pages)
Advertisement
Quick Links
Hamilton
Beache
Operation and Maintenance
Manual
Models950and936
Page 2
Batidora de
Bebidas
(120V-,
300W, 50-60Hz)
Manual deuso y
mantenimiento
Modelos
936
Pågina 9
Mélange
ur
de
boissons
Noticed'utilisation
et d'entretien
950 et 93b
Page 1 7
(120V-, 100W, 50-60Hz)
840065900
Advertisement
Related Manuals for Hamilton Beach 950
Summary of Contents for Hamilton Beach 950
- Page 1 Hamilton Beache Operation and Maintenance Manual Models950and936 Page 2 Batidora de Bebidas (120V-, 300W, 50-60Hz) Manual deuso y mantenimiento Modelos Pågina 9 Mélange boissons Noticed'utilisation et d'entretien 950 et 93b Page 1 7 (120V-, 100W, 50-60Hz) 840065900...
- Page 2 er Saf Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER"...
- Page 3 Part d Featur The parts and features of the Model 950 Triple and Model 936 Single Spindle Mixers are shown on this page. Become familiar with all parts and features before using the Mixer. Model 3-Speed switch Motor module }9miltonBeach.
- Page 4 Oper ating an d Clean ing the Mixer Repla cing th e Agitat Your Mixer was shipped with a solid agita- Complete the Steps below if you wish to tor installed on each spindle for mixing use the butterfly, soft-serve agitator: hard ice-cream drinks.
- Page 5 Operating and Cleaning the Mixer Mixi ng aDrin k (cont To mix a drink: 3. Set the speed with the 3-Speed Switch: • Low —10,000 rpm AWARNING • Medium —14,000 rpm • High —17,000 rpm 4. Position the container into the Container Guide.
- Page 6 Guide counterclockwise 2. Position the container into the Container remove. On model 950, grasp the Guide Guide and mix for 5 seconds. Empty the firmly on both sides; then gently rock container. side to side and pull down until Guide 3.
- Page 7 7. Plug Mixer into a grounded outlet. If a single motor module needs service, Reinstalling the Motor Module you can remove it on the Model 950 and 1. Unplug Mixer. still continue to use the other two modules. 2. Remove the panel from the opening.
Need help?
Do you have a question about the 950 and is the answer not in the manual?
Questions and answers