Pioneer CLD-1590K Operating Instructions Manual

Instructions
DIGITAL AUDIO LASERD/SC
This player does not apply to business
D R@VI/C graphic discscannot b eplayed withthisplayer.
WARNING: TO PREVENT F IREORSHOCK HAZARD,
DO NOT EXPOSE THIS
MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian
The serial ber for thÉ equipment is located on the rear panel.
Please write this serial number on your enclosedwarranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION:
TO PREVENT
USE THIS (POLARIZED)
CORD, RECEPTACLE OR OTHER
BLADES CAN BE FULLY INSERTED
EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATE-UR, UNE PRISE DE COURANT
OU UNE AUTRE SORTIE DE COURANT, SAUF Sl LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
CD
CLD-V720
The function
are identical.
use, and CD—
Thank you for buying this Pioneer product.
Please read through
will know how to operate your model properly.
have finished reading the instructions, put them away in a
safe place for future
In some countries or regions; the shape of the power plug
and power outlet rnay sometimes
the explanatory c.fawings.
connecting and operating the unit is the same.
APPLIANCE TO RAIN
models]
ELECTRIC SHOCK DO NOT
PLUG WITH AN EXTENSION
OUTLET UNLESS
TO PREVENT BLADE
(f) PIONEER
The Art
CDV LD PLAYER
of both units, CLD-1590K
these operating instructions
reference.
differ from that shown in
However. the method
LINE VOLTAGE
OR
Only multi-voltage
U.S., Canadian,
are not provided
The line voltage seiector switch is located on the rear pane!
of this player. Befcue your player is shipped from the factory,
the switch is set to the power requirements
destination. Check that it is set properly before plugging
the power cord into the outlet. If the voltage is not proper!}'
set or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows:
Use a medium-sized
of the screwdriver
and turn it to set the player to the power voltage of your
THE
area.
of Entertainment
and CLD-V720
so you
After you
of
SELECTOR SWITCH
models are provided With this switch.
European, U.K., and Australian
with this switch.
(flat blade) screwdriver.
into the groove of the selector switch
Set the selector
arrow points
voltage of your area
(Figure shows
pointing to 110 volts)
NTSC
models
of the player's
Insert the tip
so that
power
arrow