Frequency/Voltage Control - MSI K7T TURBO2 - K7T Turbo 2 Motherboard User Manual

Chapter 3

Frequency/Voltage Control

CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
CPU Vcore Select
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
Clock By Slight Adjust
CPU Clock Ratio
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
CPU Vcore Select
End users can adjust the CPU core voltage through the field. Settings:
Default, and a range from 1.550V to 1.850V at 0.025V increment.
Auto Detect DIMM/PCI Clk
This item is used to auto detect the DIMM/PCI slots. When set to Enabled,
the system will remove (turn off) clocks from empty DIMM/PCI slots to
minimize the electromagnetic interference (EMI). Settings: Enabled and
Disabled.
Spread Spectrum Modulated
When the motherboard clock generator pulses, the extreme values (spikes)
of the pulses creates EMI (Electromagnetic Interference). The Spread
Spectrum function reduces the EMI generated by modulating the pulses so
that the spikes of the pulses are reduced to flatter curves. If you do not
have any EMI problem, leave the setting at Disabled for optimal system
stability and performance. But if you are plagued by EMI, setting to En-

Frequency/Voltage Control

Default
Enabled
Enabled
133
Default
F6:Fail-Safe Defaults
3-32
Item Help
Menu Level 8
F7:Optimized Defaults