Advertisement
Quick Links
Advertisement
Related Manuals for Russell Hobbs RHPCF825
Summary of Contents for Russell Hobbs RHPCF825
- Page 1 Operating Manual for RHPCF825 (B) REGISTER TODAY FOR YOUR FREE ADDITIONAL YEAR GUARANTEE...
- Page 2 GUARANTEE At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Customer Services Team who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. • Do not use with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS • Do not handle the appliance with wet hands. • Do not pull or carry by the cord, use the cord as a handle, close doors on the cord, pull the cord around sharp corners or edges, or expose the cord to heated surfaces.
- Page 5 PARTS Grill locking nut Motor Blade locking nut Fixed Pole Blade Display & controls Fan head Pole Front Grill Remote control Base & batteries...
- Page 6 ASSEMBLY 1. Align the pole with the hole in the base and rotate to fix into place. 2. Align and rotate the fixed pole next with the fan motor/body.
- Page 7 ASSEMBLY 3. Remove the grill locking nut and blade locking nuts from the motor shaft. 4. Place the Fan head onto the motor front case ensuring that the shaft points are aligned with the grill holes. Use the Grill locking nut to fix the Fan head into place by turning clockwise. Rotate clockwise and fix the rear grille Align the convex point on the...
- Page 8 ASSEMBLY 5. Fix the blade on the motor shaft with the blade locking nut. Convex to concave Rotate counter- clockwise Fix the blade with left hand Press the blade inwardly Rotate the blade counterclockwise with the right hand to lock the blade lock nut 6.
- Page 9 ASSEMBLY 7. Align the decorative ring to the hole in the front grill, then rotate clockwise to fix it. Rotate counterclockwise to loosen the decorative ring. ADJUSTING THE TILT ANGLE OF YOUR Manually adjust the TILT angle of the Fan Head by moving the Motor up or down.
- Page 10 USING YOUR FAN USING YOURFAN Press this key to turn on or put in standby. On/Off When the fan is turned on, press this key to begin Oscillating oscillation. Press this key to cycle wind speed (1-2-3-4 ... Wind Speed cycle).
- Page 11 REMOTE CONTROL • The remote control can be used normally within 5m in front of the product and within an angle of 30°. • The battery contains heavy metals, acid and alkali substances, which threaten human health; waste batteries should be sorted and recycled.
- Page 12 REMOTE CONTROL...
- Page 13 CLEANING & MAINTENANCE The fan requires minimal maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed. 1. Before cleaning and assembling, unplug the fan power. 2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust.
- Page 14 PROBLEM SOLVING • Check the fan is plugged in The fan doesn’t • Check the socket is switched on switch on • Check another appliance in the socket • Unplug and check for any obvious signs of damage to the cord or plug •...
- Page 15 NOTES...
- Page 16 WN2 4AY, United Kingdom / Product Care (Ireland) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, T23 AT2P, Ireland. Russell Hobbs is the registered trademark of Spectrum Brands (UK) Ltd. The ‘wheelie bin’ symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste.
Need help?
Do you have a question about the RHPCF825 and is the answer not in the manual?
Questions and answers