Novell SENTINEL 6.1 SP2 - REFERENCE GUIDE 02-2010 Reference Manual page 63

5 Click Set password. Provide the new password twice and click OK. Click Apply and click OK.
Updating Sentinel Database User Password
These password change procedures are only necessary if extra Sentinel Data Manager jobs have
been created and scheduled or the Sentinel Data Manager command line interface is being used.
To change Sentinel DB Administrator password (Windows Authentication):
1 Use the Windows Operating System to change the password as described in
"Changing Password," on page
2 If you are running any SDM command line scheduled tasks in your environment, you will need
to update the Run as property (Control Panel > Scheduled Tasks > right-click Properties).
3 Click Set password. Provide the new password twice and click OK. Click Apply and click OK.
To update the Sentinel DB Administrator password (Native DB Authentication):
1 Change the password for the Sentinel DB Administrator User (esec by default) using database
utilities password as described in
60.
Section 6.2.1, "Changing Password," on page
Section 6.2.1,
60.
Sentinel Accounts and Password Changes 63