Performing A Silent Install Of The Platespin Orchestrate Agent On Multiple Network Resources - Novell PLATESPIN ORCHESTRATE 2.0.2 - INSTALLATION AND CONFIGURATION GUIDE 10-09-2009 Installation And Configuration Manual

esxcfg-firewall -o 8101,tcp,out,port_name
8 Start the agent by entering the following command:
/etc/init.d/novell-zosagent start
9 Register the agent to the PlateSpin Orchestrate Development Client. For more information on
how to register the agent, see
page 103.
2.3.3 Performing a Silent Install of the PlateSpin Orchestrate
Agent on Multiple Network Resources
In a large data center, it might not be practical to perform an interactive configuration of the
Orchestrate Agent on the multiple servers that you intend to use for PlateSpin Orchestrate resources.
The information in this section provides information about performing a silent install and
configuration.
"Silent Install and Configuration of the Orchestrate Agent RPM" on page 67
"Silent Install and Configuration of the Orchestrate Agent for Windows" on page 68
Silent Install and Configuration of the Orchestrate Agent RPM
Use the following process to configure the Orchestrate Agent RPM (downloaded from the product
ISO) on multiple servers:
1 Perform the product installation and manual configuration of the agent on a "seed" machine.
The processes to do this are described in
on page 22.
2 On the "seed" machine, copy the file found at
novell_zenworks_orch_install.conf
3 Edit the local copy of
require a password (for security purposes, when a configuration program runs, the passwords in
the . file are deleted).
conf
4 Edit any other fields as necessary for the configuration of the Orchestrate Agent.
5 Distribute the modified file to the machines where you want to perform a silent configuration.
6 At the machine where you distributed the
Installation of the RPMs as described in
Configuring All PlateSpin Orchestrate Components Together," on page
do not configure the agent manually.
7 From the bash prompt on the machine where you are configuring the agent, run the following
command:
/opt/novell/zenworks/orch/bin/config -s -C $CONF_FILE
where CONF_FILE is the modified configuration file from
The silent configuration runs, then the agent is displayed in the PlateSpin Orchestrate Console as
registered with the server node.
Section 3.3, "Walkthrough: Creating a Resource Account," on
Section 2.2.1, "Installation and Configuration Steps,"
/etc/opt/novell/
to a location where you can modify it locally.
novell_zenworks_orch_install.conf
.conf
Step 1
, updating the fields that
file, open YaST and perform the Add-on
through Step 4 in Section 2.2, "Installing and
21. Make sure that you
Step 5.
Installation and Configuration 67