Novell OPEN ENTERPRISE SERVER CLUSTER SERVICES 1.8.2 - ADMINISTRATION Manual page 52

Cluster Console Command
MAINTENANCE {ON|OFF}
MIGRATE {resource}{node name}
OFFLINE {resource}
ONLINE {resource}{node name}
POOLS
RESOURCES
RESTART {seconds}
52 OES Novell Cluster Services 1.8.2 Administration Guide for Linux
Description
Turning this switch on lets you temporarily suspend
the cluster heartbeat while hardware maintenance is
being performed. This is useful if you want to reset or
power down the LAN switch without bringing the
cluster servers down.
Turning this switch on from one cluster server puts
the entire cluster in maintenance mode.
Migrates the specified resource from the node where
it is currently running to the node you specify in the
command. The node you migrate the resource to
must be running in the cluster and also be in the
resource's assigned nodes list.
Unloads the specified resource from the node where
it is currently running.
Starts the specified resource on the most preferred
node that is currently active. You can start the
resource on a different node by specifying that node
in the command.
Lists the NSS pools on the shared disk system that
are accessible by Novell Cluster Services.
Lists all resources that currently exist in the cluster.
The resources do not need to be online or running.
Restarts Novell Cluster Services software on all
servers in the cluster.