Changing Time Synchronization Settings on a SLES 10 Server
This method works both in the GUI and at the command prompt and is the most reliable method for
ensuring a successful NTP implementation.
1 Launch YaST on your SLES 10 server by either navigating to the application on the desktop or
typing
2 Click Network Services > NTP Client.
3 In the NTP Client Configuration dialog box, click Complex Configuration.
4 Modify the NTP time settings as your needs require.
Changing Time Synchronization Settings on a NetWare Server
Time synchronization settings and their modification possibilities are documented in the following
administration guides:
Timesync:
NTP:
12.3.6 Daylight Saving Time
For information about daylight saving time (DST), see the
site (http://www.novell.com/support/php/
search.do?cmd=displayKC&docType=kc&externalId=3094409)
12.4 Discovery Services
Various discovery mechanisms are usually available on an OES 2 network.
DNS/DHCP
Directory services
Local host configuration files
Service Location Protocol (SLP services)
Universal Description, Discovery, and Integration (UDDI) server
Some systems are designed to leverage only a single discovery technology. Others choose among
the various providers. And some use different technologies in combination with each other.
Section 12.4.1, "Novell SLP and OpenSLP," on page 110
Section 12.4.2, "WinSock and Discovery Is NetWare only," on page 111
Section 12.4.3, "UDDI and Discovery," on page 111
Section 12.4.4, "CIMOM and Discovery," on page 111
12.4.1 Novell SLP and OpenSLP
NetWare 3 and 4 used the IPX-based Service Advertising Protocol (SAP) as the discovery
mechanism. All the servers advertised their services automatically. If a server went offline, the SAP
information on the network was dynamically refreshed.
110 OES 2 SP3: Planning and Implementation Guide
at the command prompt.
yast
NW 6.5 SP8: Network Time Synchronization Administration Guide
NW 6.5 SP8: NTP Administration Guide
DST Master TID on the Novell Support
Need help?
Do you have a question about the OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010 and is the answer not in the manual?
Questions and answers